Sanyo VPC-GH1EX Instruction Manual page 122

4
Specify the start point of the extract.
h Use the procedure below to specify the frame from which the video
clip extract will start.
h Play the video clip until approximately the desired point, pause the
video clip, then play the video clip one frame at a time, stopping at the
start point of the extract. This will be the first frame of the extract.
h If the start point of the video clip is also the start point of the extract,
proceed to step 5.
<Procedure>
Play:
After pausing playback, press and hold [H] for about 2 seconds for
forward playback, or [G] for reverse playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, press [G] or [H] to change the playback speed.
Single frame:
After pausing playback, press [H] to move forward one frame, or [G]
to move back one frame.
113
English