SIDE SHELF HANDLE ASSEMBLY
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver (not included)
1. Remove the four side shelf handle screws from the side shelf.
2. Align the holes in the handle with the holes in the shelf.
3. Insert the screws and tighten.
BATTERY INSTALLATION
1.
Remove the ignition button housing by turning counterclockwise.
2.
Insert the battery into the housing with the positive (+) terminal facing outward.
3.
Replace the ignition button housing after the battery has been installed.
400
500
600
300
700
200
800
100
400
500
600
300
700
200
800
100
7