Sharp LC-70UD20E Operation Manual page 78

Appendix
Reset the PIN
1
Go to "TV Menu" > "Setup".
2 Press a/b to select "Auto installation", "Programme setup", "PIN",
"Parental rating" or "Reset", and then press ;. The PIN input window will
display.
3
Press and hold both :r and i+ on the TV simultaneously until the
message appears on the screen.
NOTE
• When the PIN code is reset, the default PIN code ("1234") is set.
Reset
If complex adjustments are made so that the settings cannot be restored to
normal, you can reset the settings to the factory preset values.
1
Go to "TV Menu" > "Setup" > "View setting" > "Reset".
Press c/d to select "Yes", and then press ;.
2
• "Now, TV will restart automatically, OK?" displays on the screen.
3 Press c/d to select "Yes", and then press ;.
• "Now initialising..." displays on the screen and blinks.
• After the reset has completed, the power shuts off and then comes back on. The
screen will have returned to its original settings.
NOTE
• PIN input is required when executing "Reset". The default PIN is "1234". To change the
PIN setting, refer to Individual setting — PIN (Page 41). To reset the PIN setting (PIN
input will no longer be needed), refer to Reset the PIN shown above.
• "Reset" is greyed out in 3D mode. To select the "Reset" menu, you need to switch to 2D
mode.
76