Sharp AQUOS LC-70UHD80R Operation Manual page 46

Useful viewing functions
Terminal setting
Option
Digital audio output
This function allows you to select the digital audio
signal type.
Go to "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "Digital audio output".
Item
To stereo audio system
PCM
To multi-channel Dolby Digital, DTS
Bitstream
audio system
Option
Audio select
When using the PC terminal or HDMI 3 terminal, you
must select which terminal uses the AUDIO (L/R)
jack for analogue audio input.
Go to "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "Audio select".
When selecting "HDMI 3" from the "INPUT" menu
Item
When connecting devices (including a PC)
HDMI
with a HDMI cable to the HDMI 3 terminal.
When connecting devices (including a
HDMI + PC) with a DVI/HDMI cable to the HDMI
Analogue 3 terminal and inputting analogue audio
signals from the AUDIO (L/R) jack.
When selecting "PC" from the "INPUT" menu
Item
When connecting devices with an
Video AV cable to the PC terminal, displays
images without audio.
When connecting a PC to the PC
Video+Audio terminal, and inputting analogue audio
signals from the AUDIO (L/R) jack.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the inputs on the
input source selection operation.
Go to "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "Input skip".
NOTE
• When you select "ATV", "DTV" or "SAT", the skip function
works only when using the b button on the TV.
• If you connect external equipment to an HDMI terminal
which you have set to be skipped, a notification
message appears on the display when a signal is
received from the connected external equipment. Press
"OK" to reset the related skipping setting so that the
input terminal becomes available.
Input source settings
Option
Input select
For setting the signal type of external equipment.
1 Press b to select the input source for setting
the input signal ("EXT1") from the "INPUT"
menu, and then press ;.
2
Go to "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "Input select".
Item
EXT1 Y/C, CVBS, RGB
EXT2 AUTO, COMPONENT, VIDEO
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment
for the signal type.
• When the signal type is set to "Auto", the input terminal
where a cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, "Video" will be selected.
44
Option
Input label
You can label each input source with a custom
description.
1
Press b to select the desired input source
from the "INPUT" menu, and then press ;.
2
Go to "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "Input label".
3
Select each character of the new name for the
input source with using the software keyboard
(Page 11).
NOTE
• The label can be six characters or less.
• This menu can be changed in the case of the following
input sources:
− EXT1–2
− HDMI1–4
− PC
CH list
INPUT
TV
Switchable
Selecting the HDMI picture size
automatically
Option
HDMI auto view
This function allows you to automatically change to
the appropriate picture size when viewing an HDMI
signal using the HDMI 1, 2, 3 and 4 terminals.
1 Press b to select the input source ("HDMI 1",
"HDMI 2", "HDMI 3" or "HDMI 4") connected to
your HDMI device, and then press ;.
2
Go to "TV Menu" > "Setup" > "Option" >
"Terminal setting" > "HDMI auto view".