Connection - Telefunken TF-DVBT203 Instruction Manual

Connection

Connection
Antenna input
• Connect an external DVB-T antenna
(cable) connector to the antenna RF IN.
The signal in the block cable antenna
can fail to contain DVB-T/T2 signal due to the
carrier frequency altered by the cable network
operator.
RF output
• Connect the RF output jack to an antenna
cable to bypass the digital signal to other
devices.
HDMI-out
• If your TV has an HDMI video output,
connect it to an HDMI output of this unit using
a special HDMI cable (not included).
Stereo audio output
• Connect the left (white) and right (red)
terminal of the stereo audio output to the
corresponding audio inputs on your TV using
the supplied RCA-type cable.
Composite vudeo (CVBS) output
• Connect the yellow video output to the
composite video input on your TV using the
RCA cable (included) for transmitting the
composite video signal.
4
4