Table of Contents
Advertisement
Option 1: Connect audio through a
digital optical cable
Best quality audio
1
Using an optical cable, connect the
OPTICAL IN connector on your
SoundBar to the OPTICAL OUT
connector on the TV or other device.
•
The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
IN (3.5mm jack) on your SoundBar to the
AUDIO OUT connectors (red and white)
on the TV or other device.
2
Press repeatedly AUX on the remote
control until AUX is displayed on the
display panel.
4 Use your
This section helps you use the SoundBar to play
audio from connected devices.
TV
Before you start
•
•
Adjust the volume
1
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predefined sound modes to suit your
video or music.
1
SoundBar
Make the necessary connections described
in the quick start guide and the user
manual.
Switch the SoundBar to the correct source
for other devices.
Press +/- (Volume) to increase or decrease
a volume level.
•
To mute sound, press
•
To restore the sound, press
again or press +/- (Volume).
Press SOUND to select a sound option
from the display panel.
AUTO: Automatically select a sound
•
setting based on the sound stream.
POWERFUL: Enjoy thrilling arcade
•
sounds, ideal for action-packed videos
and loud parties.
BALANCED: Experience the original
•
sound of your movies and music,
without added sound effects.
(Mute).
(Mute)
EN
9
Advertisement
Table of Contents
