Table of Contents
Advertisement
Adjustments
Turning On the Projector
If the PIN code is set on the projector, you cannot use the projector. The PIN code can be reset to the factory default
setting (1234) according to the following procedure.
When you reset the PIN code, the Logo PIN code and key lock will be reset, as well.
1. Disconnect the AC power cord from the AC outlet.
2. As pressing the
SELECT
pressing the
3. Turn the projector on with the
Please refer to the owners manual for further information.
Adjustments after Parts Replacement
Contrast Adjustment
R-Contrast adjustment
G-Contrast adjustment
B-Contrast adjustment
Integrator lens adjustment
Relay lens-out adjustment
Fan control adjustment
Pedestal adjustment [PC]
Gain adjustment [PC]
Pedestal adjustment [1080i]
Gain adjustment [1080i]
Gain adjustment [Video]
Black reference adjustment
Common center adjustment
50% white adjustment [PC]
White balance adjustment [PC]
50% white adjustment [Video]
White balance adjustment [Video]
White uniformity adjustment
SELECT
button on the projector, connect the AC power cord into an AC outlet again. Keep
button until the POWER indicator lights continuously.
ON-OFF
button, enter the PIN code "1234" (the factory default setting).
LCD/
Prism Ass'y
❍
❍
●
●
❍
●
❍
❍
●
: Adjustment necessary
Disassembly / Replaced Parts
Relay
Integrator
Lens (OUT)
Lens (OUT)
●
●
-17-
❍
: Check necessary
Polarized glass
Power
Board
R
G
B
●
●
●
●
Main Board
●
●
●
●
●
●
●
●
●
❍
●
❍
❍
Advertisement
Table of Contents
