Pioneer VSX-418-K Service Manual page 11

5
GUIDE
Displays/changes the subtitles on
multilingual DVDs.
PTY SEARCH
Use to search for RDS program types.
SETUP
Press to access the System Setup menu.
Also functions as the SETUP
button for DVD/DVR units.
T.EDIT
Memorizes/names stations for recall.
MENU
Displays the disc menu of DVD-Video discs.
RETURN
Confirm and exit the current menu screen.
CH +/–*
Use to select channels for DVD/DVR units.
6 (TUNE , ST
Use the arrow buttons when setting up your
surround sound system. Also used to
control DVD menus/options.
Use the TUNE buttons can be used to find
radio frequencies and the ST
buttons can be used to select preset radio
stations.
7 Component control buttons
Use these buttons to control a Pioneer DVD
player or recorder connected to your system.
These buttons can be accessed after the DVD
or DVR button is pressed.
Button What it does
Starts/resumes normal playback.
Pauses/unpauses a disc.
Stops playback.
/ Press to start fast reverse/forward
scanning.
Skips to the start of the current track
or chapter, then previous tracks/
chapters.
Skips to the next track or chapter.
REC* Starts recording.
* Stops recording.
REC STOP
Displays/changes the subtitles on
SUBTITLE
*
multilingual DVD-Video discs.
AUDIO Changes the audio language or
*
channel on DVD discs.
HDD*, Switch between the hard disk and
DVD* DVD controls for DVR.
Display the jukebox screen.
JUKEBOX *
8 Number buttons and other component
controls
Use the number buttons to directly select a
radio frequency or the tracks on a
Pioneer DVD/DVR units. There are other
buttons that can be accessed after the
RECEIVER button is pressed. (For example
MIDNIGHT, etc.)
TUNER DISP*
Switches between named station presets
and radio frequencies.
5
6
), ENTER
VSX-418-K
6
7
CLASS*
Switches between the three banks
(classes) of radio station presets.
MPX*
Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality.
D.ACCESS*
After pressing, you can access a radio
station directly using the number buttons.
MIDNIGHT
Switches to Midnight or Loudness
listening.
ANALOG ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
DIMMER
Dims or brightens the display.
SLEEP
Press to change the amount of time before
the receiver switches into standby (30 min
– 60 min – 90 min – Off). You can check
the remaining sleep time at any time by
pressing SLEEP once.
SIGNAL SEL
Use to select an input signal.
EON*
Use to search for programs that are
broadcasting traffic or news information.
9 INFO
Displays additional EPG information
DVD/DVR.
SHIFT
10
Press to access the 'boxed' commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (* ) in this section.
11 Remote control LED
Lights when a command is sent from the
remote control.
12 SOURCE
Turns on or off the power of the Pioneer DVD/
DVR units when DVD or DVR is selected using
the MULTI CONTROL buttons.
13 RECEIVER
Switches the remote to control the receiver
(used to select the green commands above
the number buttons (SETUP, etc)). Also use
this button to set up surround sound.
14 TV CONTROL buttons
These buttons can control only be used with
Pioneer flat screen TVs.
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
TV VOL +/–
Use to adjust the volume on your TV.
7
8
A
B
C
n a
o
D
E
F
11
8