Table of Contents
Advertisement
ASSEMBLY
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
1
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
Locking caster
Bottom shelf
Attach cart frames to bottom shelf using three 1/4-20x1/2"
2
screws, 7mm lock washers, and 7mm flat washers per panel.
IMPORTANT: Panel with large hole must be on left side of
bottom shelf.
Left cart frame
(with large hole)
Make sure cart frames
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Fixed caster
1/4-20x1/2" screw
7mm flat washer
7mm lock washer
A
Bent U pin
Right cart frame
17
Advertisement
Table of Contents
