Server Windows And Menus - Crestron SW-DBM User Manual

Crestron e-control Database Manager
27 Server Configuration In Depth
Special Modes
Check the Auto-Pick box to send a Pick
Data Fields
The Data Fields Defined textbox defines the number of Data
Fields Filter textbox defines the initial value of the data filter bit pattern. See page
54 for a discussion of "Bit Patterns.' The control system can change the data filter bit
pattern at run-time using the DataFilter signal. See the entry for the DataFilter
signal in the Signal Reference for more information.
Edit Signals
Checking the Edit Signals box defines the Write
Write signal in the Signal Reference for more information.
d
Buffer
Checking the Buffer box enables the UpdateRec signal that copies changed scroller
records to the database. In the current version of the server, this signal is not
implemented; the Write signals currently update the database.

Server Windows and Menus

This section contains descriptions of the server's two main windows, the Server
Monitor window and the Signal Analyzer window.
The Server Monitor Window
While the server protocol is running, the Server | Start w/Signal Analyzer
command from the Server Monitor window opens the Signal Analyzer window. (If
the server is already running, toggling Server | Signal Analyzer does the same
thing.)
The Server Monitor window. The server protocol has been started with a single system connected via
RS-232. Note the name of the currently loaded configuration in the title bar.
signal automatically on each scroll action.
1
signals. The Data
d
signals. See the entry for the
d
Installation & Reference Guide — DOC. 5823
SW-DBM