Attaching The Mounting Plate To The Wall - Bosch HMV 8051 U Installation Instructions Manual

Wall studs at both corner holes
I
Attaching the mounting plate to the wall
Aligning the mounting plate
_ CAUTION: Wear gloves to avoid cutting fingers on sharp edges.
Note: Make sure the cabinet bottom is level.
1. Draw a vertical line on the wall at the center of the cabinet space.
2. Use the mounting plate as a template and place it on the wall, making sure that
the tabs are touching the bottom of the cabinet (Figure 1) or the level line
(Figure 2).
3. Line up the notch and centerline of the mounting plate to the centerline on the
wall.
4. While holding the mounting plate, draw circles on the wall at holes A, B, C
and D.
Note: If neither A, B, C nor D is in a stud, find a stud somewhere in the bottom area
of the mounting plate and draw a fith circle to line up with the stud.
It is important to use at least one wood screw mounted firmly in a stud to support
the weight of the microwave.
12