Setting Up Your Camera - D-Link DCS-2132L Quick Installation Manual

Setting up your Camera

Using a D-Link Cloud Router (Zero Configuration)
If you have a D-Link Cloud Router, you can take advantage of Zero
Configuration Setup. This feature automatically configures your camera's
settings for you and adds it to your mydlink account automatically. If you
do not have a D-Link Cloud router, refer to the next page to install and
configure your camera.
Connect the power cable and Ethernet cable to your
cloud camera.
Connect the other end of the Ethernet cable to
your D-Link Cloud Router and connect the camera's
power adapter to a power outlet.
From any computer, open a web browser, go to
http://www.mydlink.com and log in to your account.
Click on the device name when the new device
notification appears to add the camera to
your account.
If you wish to connect your camera to your router with a wireless connection,
you can simply disconnect the Ethernet cable and move the camera to its
intended location.
DCS-2132L
3