1. Manuals
  2. Brands
  3. Omron Manuals
  4. Blood Pressure Monitor
  5. HEM-431CAN
  6. Instruction manual

Omron HEM-431CAN Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Manual Inflation
Blood Pressure Monitor
HEM-431CAN
Model

Advertisement

Table of Contents
loading

Related Manuals for Omron HEM-431CAN

Summary of Contents for Omron HEM-431CAN

  • Page 1 INSTRUCTION MANUAL Manual Inflation Blood Pressure Monitor HEM-431CAN Model...

  • Page 2: Table Of Contents

    CONTENTS Before Using the Monitor Introduction ......... .3 Important Safety Notes .

  • Page 3: Introduction

    INTRODUCTION Thank you for purchasing the Omron ® HEM 431CAN Manual Inflation Blood Pressure Monitor Fill in for future reference. DATE PURCHASED: __________________ SERIAL NUMBER: ____________________ Staple your purchase receipt here Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement.

  • Page 4: Important Safety Notes

    IMPORTANT SAFETY NOTES To assure the correct use of the product basic safety measures should always be followed including the precautions listed below: Read all information in the instruction book and any other literature included in the box before using the unit. Contact your physician for specific information about your blood pressure.

  • Page 5: Before Taking A Measurement

    BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations: 1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes before taking a measurement. Rest for at least 15 minutes before taking the measurement. 2. Stress raises blood pressure. Avoid taking measurements during stressful times.

  • Page 6: Know Your Unit

    KNOW YOUR UNIT Main Unit: Display HEM- ON/OFF Button Date/Time Setting Button Battery Compartment MEMORY Button Bulb Air Plug Cuff Air Plug Components: Air Tube Air Tube Arm Cuff Air Release Button Inflation Bulb...

  • Page 7: Unit Display

    UNIT DISPLAY Systolic Blood Pressure Diastolic Blood Pressure Memory Symbol Heartbeat Symbol Pulse Display Average Value Symbol Deflation Symbol Date/Time Display Low Battery Symbol Reinflation Symbol...

  • Page 8: Battery Installation

    BATTERY INSTALLATION 1. Press the ▲ indicator on the battery cover and slide the cover off in the direction of the arrow. 2. Install 4 “AAA” size batteries so the + (positive) and (negative) polarities match the polarities of the battery compartment as indicated. 3.

  • Page 9: Setting The Date And Time

    SETTING THE DATE AND TIME Set the monitor to the current date and time before taking a measurement for the first time. If the correct date and time is not set, the measurement values stored in the memory and the average value will not be correct. The Blood Pressure Monitor automatically stores up to 30 measurement values.
  • Page 10 SETTING THE DATE AND TIME 2. SETTING THE YEAR The year can be set between 2005 and 2030. When the display reaches 2030, it will return to 2005. Press the MEMORY button to advance by increments of one year. Press the Date/Time Setting button to set the current year.
  • Page 11 SETTING THE DATE AND TIME 5. SETTING THE HOUR The time is set using AM or PM. Press the MEMORY button to advance by increments of one hour. Press the Date/Time Setting button to set the current hour. The minutes flash on the display. 6.

  • Page 12: Applying The Arm Cuff

    APPLYING THE ARM CUFF 1. Connect the air tube of the arm cuff and the inflation bulb to their air jacks. 2. Remove tight fitting clothing from your upper arm. 3. Sit in a chair with your feet flat on the floor. Place your arm on a table so the cuff is level with your heart.
  • Page 13 APPLYING THE ARM CUFF 4. Apply the cuff to your left upper arm so the blue arrow is centered on the inside of your arm and aligned with your middle finger. The air tube runs down the inside of your arm. The bottom of the cuff should be approximately 1/2"...

  • Page 14: Taking A Measurement

    TAKING A MEASUREMENT 1. Press the ON/OFF button All display symbols appear on the screen. NOTE: When the monitor completes the necessary preparations before measurement, the Heartbeat Symbol ( ) appears next to the zero. Wait for the Heartbeat Symbol ( ) before taking a measurement.
  • Page 15 TAKING A MEASUREMENT 4. Inflation stops and the measurement is started. As the cuff deflates, decreasing numbers appear on the display. The Heartbeat Symbol ( ) flashes at every heartbeat. NOTE: If the re inflation symbol ( ) appears, squeeze the inflation bulb to re inflate the arm cuff.

  • Page 16: Using The Memory Function

    USING THE MEMORY FUNCTION Every time you complete a measurement the monitor stores the blood pressure and pulse rate in the memory. The Blood Pressure Monitor automatically stores up to 30 measurement values. When 30 sets of measurement values are stored in the memory, the oldest record is deleted to save the most recent measurement values.

  • Page 17: Measurement Values

    USING THE MEMORY FUNCTION TO DISPLAY THE MEASUREMENT VALUES The date and time is alternately displayed with the measurement values. 1. Press the MEMORY button while the Average Value Symbol ( is displayed. The most recent measurement values will be displayed. NOTES: •...

  • Page 18: Care And Maintenance

    CARE AND MAINTENANCE To keep your digital blood pressure monitor in the best condition and protect the unit from damage follow the directions listed below: Do not forcefully bend the arm cuff or air tube. Do not fold tightly. Clean the monitor with a soft dry cloth. Do not use any abrasive or volatile cleaners.

  • Page 19: Error Indicators And Troubleshooting Tips

    ERROR INDICATORS SYMBOL CAUSE CORRECTION Remove the arm cuff. Read, Cuff under inflated. “Taking a Measurement” on page 14. Wait 2 3 minutes. Take another Cuff over inflated. measurement. Replace the four batteries. Refer Batteries are worn. to page 8 for battery installation. Blinking or Steady TROUBLESHOOTING TIPS PROBLEM...

  • Page 20: Fcc Statement

    FCC STATEMENT NOTE: POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only) This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 21: Warranty Information

    OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR INDIRECT COSTS, EXPENSES OR DAMAGES. Some provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusions may not apply to you.

  • Page 22: Specifications

    SPECIFICATIONS Model: Omron ® HEM-431CAN (HEM-4011C-CAN) Display: LCD Digital Display Measurement Range: Pressure: 0 to 299 mmHg, Pulse: 40-180/min. Accuracy/Calibration: Pressure: ±3mmHg or 2% of reading Pulse: ±5% of reading Inflation: Manual by inflation bulb Deflation: Automatic pressure release valve...

  • Page 23: Notes

    NOTES...
  • Page 24 Made in China OMRON HEALTHCARE, INC. 1200 Lakeside Drive Bannockburn, Illinois 60015 www.omronhealthcare.com Copyright © 2009 Omron Healthcare, Inc.

Table of Contents