Installation; Wired Remote Controller - Fujitsu UTY-CDPXZC Design & Technical Manual

Table of Contents

Advertisement

6. Installation

CAUTION
To prevent personal injury, property damage, or product malfunction, read the installation manu-
al attached with the product carefully, and be sure to comply with the safety precautions.

6-1. Wired remote controller

WARNING
When installing this unit, make sure that there are no children nearby. Otherwise, injury or elec-
tric shock could result.
CAUTION
• Before opening the case of this unit, completely discharge static electricity charged on your
body. Not doing so will cause trouble.
• Do not touch the circuit board and circuit board pats directly with your hands. Otherwise, in-
jury or electric shock could result.
• Be careful so that the front case does not fall after the front case are removed. Otherwise, a
damage of the front case could result.
• To avoid incoming water or insects along the cable, always establish a trap and seal the
wiring hole.
• Overtighten of the screws may cause a distortion or a damage of the rear case.
• Do not make any additional hole the rear case to avoid a damage.
• Do not use any other screws than the included ones. Using of other screws may cause a
product malfunction or damage.
¢ Installation space
* Secure enough space where a flat screwdriver to take off a case can be inserted.
Unit : mm
30 or more
30 or more
30 or more
220 or more*
- 11 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uty-cdpxzdUty-rvnynUty-tfnxz3Fglair

Table of Contents