D-Link AC1200 User Manual page 170

Wi-fi gigabit router
Hide thumbs Also See for AC1200:
Table of Contents

Advertisement

DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
The following elements are available on the page:
Parameter
SIP
RTSP
PPPoE pass through
IPsec pass through
L2TP pass through
PPTP pass through
After specifying the needed parameters, click the APPLY button.
17 On the Settings / Internet / WAN page, create a WAN connection, move the SIP switch to the right on the
Functions / Advanced / ALG/Passthrough page, connect an Ethernet cable between a LAN port of the router
and the IP phone. Specify SIP parameters on the IP phone and configure it to obtain an IP address automatically (as
DHCP client).
Move the switch to the right to enable SIP. Such a setting allows
using the SIP ALG function. This function allows VoIP traffic to
pass through the NAT-enabled router.
Move the switch to the right to enable RTSP. Such a setting allows
managing media stream: fast forward streaming audio/video, pause
and start it.
Move the switch to the right to enable the PPPoE pass through
function.
Move the switch to the right to enable the IPsec pass through
function.
Move the switch to the right to enable the L2TP pass through
function.
Move the switch to the right to enable the PPTP pass through
function.
Page 170
Configuring via Web-based Interface
Description
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dir-842v2

Table of Contents