Electrostatic Discharge - Quectel SC200L-EM Hardware Design

LTE-TDD B40 (10 MHz)
LTE-TDD B41 (10 MHz)
NOTE
"*" means under development.

7.7 Electrostatic Discharge

The module is not protected against electrostatic discharge (ESD) in general. Consequently, it should be
subject to ESD handling precautions that are typically applied to ESD sensitive components. Proper ESD
handling and packaging procedures must be applied throughout the processing, handling and operation
of any application that incorporates the module.
The following table shows the electrostatic discharge characteristics of SC200L
Table 11: ESD Characteristics ( Temperature: 25 ºC, Humidity: 45%)
Tested Points
VBAT, GND
All Antenna Interfaces
Other Interfaces
SC200L_Hardware_Design
-97.4 -98.9
-96.2 -97.5
Contact Discharge
+/-5
+/-5
+/-0.5
-100.9
-100.2
Air Discharge
+/-10
+/-10
+/-1
SC200L Hardware Design
-96.3 dBm
-94.3 dBm
module.
Unit
KV
KV
KV
77 / 103