Output Settings - Crestron C2N-DAP8 Quick Start Manual

Digital Audio Tools
Dolby Digital EX: This is a digital input signal that provides 5.1 discrete channels of surround sound and 2
matrix rear speakers. It uses Dolby Surround EX to do all of the decoding.
Decoding Modes Available:
DTS Digital Surround: This is a digital input signal that provides 5.1 discrete channels of surround sound
(left, center, right, surround left, surround right, LFE).
Decoding Modes Available:
DTS ES Matrix 6.1: This is a digital input signal that provides 5.1 discrete channels of surround sound and
one matrix rear center (left, center, right, surround left, surround right, rear center, LFE).
Decoding Modes Available:
DTS ES Discreet 6.1: This is a digital input signal that provides 6.1 discrete channels of surround sound (left,
center, right, surround left, surround right, rear center, LFE).
Decoding Modes Available:

Output Settings

Use this tab to customize the level of all speakers in use to your personal preference. This differs from the
Room Calibration tab in that the levels you set are decoding mode specific. For example, if you would like to
hear more Center when listening to DTS Neo6: Cinema, you would make the adjustment here, so it only
affects this decoding mode.
Decoding Mode: The drop down menu lists all available decoding modes. Select the mode
you wish to adjust.
Decoding Mode Volume: This slider adjusts the overall volume of the decoding mode so that
it matches that of the other decoding modes. This helps to make a smooth transition from one
decoding mode to another without an audible difference in volume.
Speaker Adjustments: All available speakers in the project start at 0 dB and have a usable
adjustment of –30 dB to +12 dB. Adjust each speaker for the preferred level per decoding
mode.
LFE: This adjustment is for the Low Frequency Effects channel. The usable adjustment is
–15 dB to 0. Adjust to the preferred level per decoding mode.
6
• Digital Audio Processors: C2N-DAP8/RC
Crestron DAT Software
Dolby Pro Logic
User-Controlled
Dolby Digital EX
DTS 5.1 (default)
User-Controlled
DTS ES Matrix (default)
DTS ES Discreet (default)
Dolby Digital 5.1(Default)
Dolby Digital EX
Dolby Pro Logic
Dolby Pro Logic II Movie
Dolby Pro Logic II Music
Dolby Pro Logic II Matrix
DTS 5.1
DTS ES Matrix
DTS ES Discrete
DTS Neo6: Cinema
DTS Neo6: Music
Stereo
Quick Start – DOC. 6238