Samsung SGH-C414M User Manual page 150

• Auth type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to
the network.
• Protocol: set the connection protocol used by the WAP browser: WAP,
HTTP, or Other.
• Home URL: enter the URL address of the page to use as
your homepage.
• Proxy Address: This option only appears when the Protocol is set to
HTTP.
• Gateway Address: Enter the Gateway Address. This option only
appears when the Protocol is set to WAP.
• Secure connection: Select On or Off depending on whether or not
you have a secure connection. This option only appears when the
Protocol is set to WAP.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
• Advanced: allows you to configure some of the IP-specific information:
Static IP, Static DNS, Server information, and Traffic Class. Highlight
this option and press the Edit soft key to access the following options:
– Static IP: specify if you want to manually enter an IP address. Remove the
check mark if you want the server to automatically assign the IP address.
– Local Phone IP: allows you to configure the local phone IP address.
– Static DNS: specify if you want to manually enter the Domain Name Server
(DNS) address. Remove the check mark if you want the server to
automatically assign the address.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
138