Microsoft Wedge Touch Mouse Manual page 5

1 In the underside of the device, press the battery door release button,
insert one AA alkaline battery (positive side first), and slide the door shut.
The BlueTrack Technology
and flashes.
2 Press and hold the Power/Connect
device for 3 to 5 seconds. A small light on the back of the device blinks
green and red alternately. This indicates that the device is discoverable to
other Bluetooth devices within 6 minutes. To connect the device to your
computer:
a. WinDOWs
Control Panel, select Control Panel from the search results, and then
select Add device.
WinDOWs 7: On your computer, from the start menu, select Control
Panel, and in Category view, locate hardware and sound, and then
select Add a device.
b. When the device is listed, select it, and follow the instructions to
complete connection.
3 When the device is successfully connected, Setup automatically
downloads the Microsoft Mouse and Keyboard Center app to your
computer. You can use this to access and customize the features for your
device. To complete installation:
WinDOWs 8: From the Control Panel, select system and security to
open the Action Center, and then select install.
WinDOWs 7: Follow the directions displayed on the screen.
light on the underside of the device turns on
®
8: On your computer, press the Windows key, type
®
www.microsoft.com/hardware/support
button on the underside of the