Table of Contents
Advertisement
5. Frequency Response test
With unbalance input connecting LINE IN of the AMX-80, set the high EQ knob to maximum & low EQ knob to
minimum(the mid EQ to middle position),and use unbalanced output to connect MAIN OUT. The frequency
response diagram should be as following:
6. Random check
Connect AMX-80 to high quality amplifier and speaker, to check if the sound is normally.
7. The shipment setting of the AMX-80
Set all the volumes knobs to minimum, all the other knobs to middle position, and all the switches
to off position.
Test Complete
- 11 -
Advertisement
Table of Contents
