Table of Contents
Advertisement
Figure 17. Remove 8 screws
Screw specifications
4
M2.0 x 4 (
)
M2.0 x 3 (
5
)
Step 3.
Remove the dc-in cable.
Step 4.
Remove the system board.
Figure 18. Remove the system board
The LCD module is disconnected from the base cover at step 2.
Note: The LCD module is not a FRU part. Instead, it includes FRU parts as its components. Refer to
"Disassemble the LCD module" on page 39 for instructions on how to disassemble the LCD modules.
Refer to Table 3 "Part numbers for FRUs (CRUs)" on page 45 to look up the Lenovo part numbers of the
following replacement parts:
System board
dc-in cable
Number of screws
6
2
.
Chapter 4
Removing a FRU or CRU
37
Advertisement
Table of Contents
