Functional Description; Commissioning; Settings - Festool Trion PS 300 EQ Original Instructions Manual

English
Jigsaws
Max. inclined position
Max. cutting depth (depending on saw blade)
Weight according to EPTA-Procedure 01:2014
5

Functional description

[1-1; 2-2] On/Off switch-/Ausschalter
[1-2; 2-3] Gripping surface
[1-3; 2-4] Stroke speed control
[1-4] Mains power cable
[1-5] Allen key
[1-6]
Pendulum stroke switch
[2-1] Locking button (only PS 300 EQ)
[2-5]
Extraction adapter
[2-6] Lever release extraction adapter
[2-7]
Hook engage extraction adapter
[2-8] Recess for hook on extraction
adapter
[2-9]
Chip ejection
[2-10] Chip guard
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6

Commissioning

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
16
Wood
Aluminium
Steel
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
► Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and detaching the mains power ca­
ble [1-4] see fig. [2a].
PS 300 EQ
The tool has a slide switch [1-1] to switch it on
and off (I = ON; 0 = OFF).
PSB 300 EQ
The tool has a pressure switch [2-2] to switch it
on and off.
The locking button [2-1] can be engaged to op­
erate in continuous mode. Press the button
again to release the lock.
7

Settings

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
7.1 Changing tools
CAUTION
Risk of injury from hot and sharp insertion
tool
► Do not use any blunt or faulty insertion
tools.
► Wear protective gloves when handling an
insertion tool.
► Open the clamping lever [3-4] as far as the
stop.
► Remove the existing saw blade.
► Insert a new saw blade into the saw blade
mount [3-1] as far as it will go.
PS 300 EQ, PSB 300 EQ
45° to both sides
120 mm
20 mm
10 mm
2.4 kg