Panasonic NV-MD9000EN Service Manual page 133

No. Item
14 TR Band & TR Arm U.
15 Cylinder U.
16 Mechanism Flexible Cable
17 Garage U.
18 Dumper
The following parts should be applied the Oil (VFK1700) or Grease (VFK1298A).
Fig. Oil &
Grease
Fig. 11- - Connect TR Arm and TR Band
1
Fig. 11- - 1) Make full unloading condition with 3V bat
2 / 2) Install TR Arm U.
Fig. 11- - Adjust Tension
3
Fig. 11- -
4
Fig. 11- -
5
Fig. 12- - 1) Make full unloading condition with 3V bat
1 / 2) Install Cylinder U.
Fig. 12- - Turn the mechanism and install Cylinder
2 Spring, then tighten 3 screws(E)
Fig. 12- - Tighten 1 screw(F) for Cylinder Flex. Cable
3
Fig. 13 - Solder each terminal
Fig. 14- Oil 1) Engage joints(C) at S and T sides (*T side
1 first).
Fig. 14- - 2) Engage joints(B) at both S and T sides
2
Fig. 15 - Install Dumper
14
Procedure