Installing The S1C31Setuptool Package - Epson S1C31 Setup Manual

3. Setup of Software Development Environment

3.2 Installing the S1C31SetupTool package

This section describes the installation procedure for the S1C31SetupTool package, which includes the flash
loader and configuration files (such as .svd).
(1) Download S1C31SetupTool.zip from our microcontroller website and unzip it to any folder.
(2) Execute "s1c31ToolchainSetup.exe" from the extraction destination folder.
(3) After starting the installer, execute the installation according to the instructions of the
installer.
1. Check the installation contents
2. Confirmation of the terms of the license agreement
3. Select the software development environment to use
4. Select the installation folder and execute the installation
If the software development environment to be used is not installed, "Destination
Folder" will be displayed in an empty state.
5. Exit the installer
1
3
6
2
4
* When IAR EWARM is selected in [3]
Seiko Epson Corporation
S1C31 Family Software Development
Setup Guide (Rev.4.0)