Interface Icon Symbol Description - HTC CE-8201 Manual

（7）Soil resistivity measurement
（10）Brightness setting interface

7.2 Interface icon symbol description

⑴
. Jaw opening symbol, which is displayed when the jaw is opened. At this time, the
trigger may be pressed artificially; or the jaws have been seriously contaminated, and
the measurement cannot be continued.
⑵
. Battery voltage low symbol, when the battery voltage is too low, this symbol is
displayed. At this time, the accuracy of the measurement cannot be guaranteed, and the
battery should be replaced.
⑶
. The "OL" symbol indicates that the measured value exceeds the measuring range of
the clamp meter.
⑷
. Alarm symbol. This symbol indicates that the alarm has been turned on. When
the measured value is greater than or less than the set alarm threshold, the meter will
emit an intermittent "beep--beep--beep--" sound.
⑸
.
⑹
. Indicates that the resistance interface is measured by the three-four-wire
method.
⑺
. Indicates the ground voltage measurement interface.
⑻
. Indicates the AC current measurement interface.
（8）Data query interface
Indicates that the clamp method is used to measure the resistance interface.
- 7 -
（9）Alarm function interface