Cleaning - Bartscher 4ICE+ Instruction Manual

6. Cleaning

WARNING!
Before cleaning, switch the device off using ON/OFF switch
and disconnect it from the power supply (pull the plug!).
Do not use any kind of pressure water jet for cleaning the
device.
Protect the device from the water penetration.
CAUTION!
Never use steel wool for cleaning. Its particles may loosen and get mixed with
the crushed ice in a beverage.
Never use sharp or scouring cleaning agents which may scratch the surface of
the device.
Never use aggressive cleaning agents of sprays.
o Clean the device after every use, as well as after longer intervals between uses.
o Remove the collection tray for crushed ice and empty it.
o Remove the filling funnel from the device.
o Wash the collection tray and filling funnel using mild cleaning agents.
CAUTION!
All elements which had contact with cleaners should be rinsed thoroughly
with clean water, in order to remove all traces of the cleaner.
o After cleaning, reassemble all the cleaned parts.
o Clean the surface of the device with a soft, moist cloth. A mild cleaning agent may
be used for more stubborn dirt.
o After cleaning, dry and polish all surfaces with a soft cloth.
If limescale builds up inside the device, remove it by using a solution of water with
o
vinegar.
- 27 -