Advertisement
Quick Links
IMPORTANT PLEASE READ!
ISSUE #1 NO PICTURE
Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box,
contact your cable provider or the cable manufacture. Once your TV is turned to the correct video line, you
should see the "COBY" logo.
ISSUE #2 NO SOUND
Make sure the Red and White wire is connected into the L-CH & R-CH.
Make sure the Red and White wire is connected into your TV "AUDIO IN".
ISSUE #3 PICTURE FADES DARK TO LIGHT
You cannot connect the DVD player through your VCR, TV/VCR combo, Cable or Satellite.
If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF
Modulator and a four-foot coaxial cable at your local electronics store.
ISSUE #4 ROLLING, COLORLESS SCREEN
Make sure the Yellow video wire is connected into the Video connection on the DVD player and on the TV.
ISSUE #5 HAD A COLOR PICTURE, NOW RECEIVING A BLACK AND WHITE ROLLING
SCREEN
The DVD has been set to the incorrect broadcast system. Follow the below procedure on resetting the
player back to the default setting
RESET THE DVD PLAYER BACK TO THE DEFAULT SETTING
Make sure you do not have a disk in the tray.
1) Press the "Setup" button.
2) On the "Down" arrow, press it three times.
3) On the "Right' arrow, press it once.
4) On the "Down" arrow, press it three times.
5) On the "Right" arrow, press it once, then press "Enter".
6) Press the Setup button.
*The default setting will take affect as soon as you press the setup button (step 6).
If you are still having difficulty setting up your new DVD player, please contact Customer
Service or Technical Support, Monday-Friday 8:00 AM – 11:00 PM EST, Saturday and
Sunday 9:00 AM – 11:00 PM EST. You can also reach us online at
customerservice@cobyusa.com
1-800-681-2629 OR 718-416-3197
COBY DVD208
COMMON TROUBLESHOOTING ISSUES
or
techsupport@cobyusa.com
Advertisement
