1. Manuals
  2. Brands
  3. Bryant Manuals
  4. Furnace
  5. 367AAN
  6. User's information manual

Bryant 367RAN User's Information Manual

Bryant user's information manual oil furnace 367ran
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S INFORMATION MANUAL
MODEL 367RAN
OIL FURNACE
NOTE TO INSTALLER:
This manual must be left with the equipment user.
!
WARNING: If the information in this manual
is not followed exactly, a fire or explosion may
result causing property damage, personal injury or
loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
— WHAT TO DO IF YOU SMELL OIL:
— Do not try to light any appliance.
— Do not touch any electrical switch; do not use
any phone in your building.
• Immediately call your fuel supplier from a
neighbor's phone. Follow the fuel supplier's
instructions.
• If you cannot reach your fuel supplier, call the
fire department.
— Installation and service must be performed by a
qualified installer, service agency or the fuel
supplier.
Do not use this furnace if any part has been under
water. Immediately call a qualified service techni-
cian to inspect the furnace and to replace any part
of the control system and any oil control which
has been under water.

Advertisement

Table of Contents
loading

Related Manuals for Bryant 367RAN

Summary of Contents for Bryant 367RAN

  • Page 1 — Installation and service must be performed by a qualified installer, service agency or the fuel supplier. Do not use this furnace if any part has been under water. Immediately call a qualified service techni- cian to inspect the furnace and to replace any part of the control system and any oil control which has been under water.

  • Page 2: Welcome To Anew Generation Of Comfort

    WELCOME TO A NEW GENERATION OF COMFORT Congratulations! In light of rising energy costs, the 367RAN Low- Boy Oil Furnace is among the soundest investments today’s homeowner can make. Your new furnace is truly a tri- umph of technology in home heat- ing.
  • Page 3 Unique silencer system eliminates combustion noise. Return-air plenum. Stainless steel combustion chamber. Heat exchanger designed and shaped to effi- ciently transfer heat from furnace into the home. Supply-air plenum. Fully insulated internal walls minimize heat loss. High limit control prevents overtemperature.

  • Page 4: Important Facts

    • Do not cover the furnace, store trash or debris near it, or in any way block the flow of fresh air to the unit.

  • Page 5: Steps For Starting Your Furnace

    CHECK AIR FILTERS: Before attempting to start your furnace, be sure the furnace air filters are clean and in place. See “Performing Rou- tine Maintenance” section in this manual. Then proceed as follows: STEPS FOR STARTING YOUR FURNACE 1. Open all warm air registers and make sure that all return-air grills are unobstructed.

  • Page 6: Performing Routine Maintenance

    5. If furnace blower will be neces- sary for cooling system, remem- ber to turn electric power back on when needed for air condi- tioning. 6. If the furnace is being shut down because of a malfunction, call your dealer as soon as possible. ALWAYS KEEP...

  • Page 7: A Check-Up Checklist

    Remedy any problem when necessary. • Inspect the return-air duct connec- tions at the furnace to ensure it is physically sound, sealed to the furnace casing, and terminates outside the space containing the furnace.
  • Page 8 • Check for obstructions around the vent termination. © 2000 Bryant & Heating & Cooling Systems, 7310 W. Morris St. If the furnace still fails to operate, call your service representative. For your convenience, record the fur- nace product and serial numbers on Indpls., IN 46231...

This manual is also suitable for:

367aan

Table of Contents