Quick Checkout - Cobra CPI 150 Operating Instructions Manual

In order to check the
performance of your
CPI 150 before using it,
please have the following
on hand:
1. A 12 volt DC power source
(such as a vehicle battery)
2. A test load such as a lamp
or other small appliance
that can be plugged into
the AC receptacle on the
inverter.
Power Source
You will need an 11 to
15 volt DC power source
capable of supplying enough
current to run the test load. As
a rough guide, divide the
wattage of the test load by 10
to get the current (in amperes)
that the power source must
supply. A fully charged
standard automotive battery
will work fine.

QUICK CHECKOUT

Connecting to the
Power Source
Your CPI 150 BK/WH comes
with a 24 inch cable and
detachable cigarette lighter
plug that converts to an
airplane 12 volt female
connector.
WARNING
Do not connect to the power
source if flammable fumes
are present. Explosion or
fire may result.
2
2