Front Suspension Damping - Honda CRF150R 2020 Owner's Manual & Competition Handbook

Front Suspension Adjustments
44. With the front brake applied, pump the fork up
and down several times to seat the axle and
check front brake operation.
45. Tighten the front axle nut (3) to the specified
torque:
51 lbf·ft (69 N·m, 7.0 kgf·m)
(3)
(3) front axle nut
46. Turn the rebound damping adjuster screws
back to their original settings.
100
Adjustments for Competition

Front Suspension Damping

Compression Damping
Compression damping affects how quickly the
fork compresses.
The compression damping adjuster has 6 1/4 turns
or less.
Always start with the full hard position when
adjusting damping.
To adjust to the standard position:
(1)
(1) compression damping adjuster
1. Turn the compression damping adjuster (1)
clockwise until it will no longer turn (lightly
seats). This is the full hard position.
2. Turn the adjuster counterclockwise 1 1/4 turn.
This is the standard position.
3. Make sure that both fork legs are adjusted to
the same position.
Rebound Damping
Rebound damping effects how quickly the fork
rebounds.
The rebound damping adjuster has 3 turns or less.
Always start with the full hard position when
adjusting damping.
To adjust to the standard position:
(1)
(1) rebound damping adjuster
1. Turn the rebound damping adjuster (1)
clockwise until it will no longer turn (lightly
seats). This is the full hard position.
2. Turn the adjuster counterclockwise 1 1/4 turn.
This is the standard position.
3. Make sure both fork legs are adjusted to the
same position.