Cobra PR 650WX Owner's Manual page 5

9509-PR650-2WX VP-D-FINALC
Using Your Radio
Operation
Listening for a Response
Listening
When you are finished talking:
– Release the Talk button to receive incoming
transmissions. Your microTALK
always in Standby mode while the Talk
or Call buttons are not pressed.
Volume Button
Volume
•
To adjust the volume:
– Press the Volume Up or Volume
Down button.
Volume Level
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Call Button
Call Button
To alert another person that you are calling:
– Press and release the Call button.
The other person will hear a two second call
tone. This tone is used only to establish voice
communications.
See page 13 on how to select between
five call tone settings.
Display Illumination
Light/Max Range
To illuminate your display:
– Press and release the Light/Max Range button
to illuminate the display for 10 seconds.
English
4
3/29/06 3:43 PM Page 4
Introduction
Auto Squelch/Maximum Range
•
Your microTALK
which automatically shuts off weak transmissions and
unwanted noise due to terrain, conditions or if you've
® radio is
reached your Maximum Range limit.
You can temporarily turn off auto squelch or turn on
maximum range extender, allowing all signals to be
received and extending the maximum range of your radio.
Light/Max Range
•
Lock Function
The Lock function locks the Channel Up, Channel Down and Mode
buttons to prevent accidental operation.
•
Lock Button
Lock Icon
Operation Customer Assistance Warranty
® radio is equipped with Auto Squelch,
To temporarily turn off auto squelch:
– Press the Light/Max Range button for
less than five seconds.
If you hear two beeps, you have turned
the maximum range extender on (see below).
To turn maximum range extender on:
– Press and hold the Light/Max Range button
for at least five seconds until you hear
two beeps which indicates the maximum
range extender is on.
To turn maximum range extender off:
– Press and release the Light/Max Range
button or change channels.
To turn the lock on or off:
– Press and hold the Lock button for
two seconds.
A double beep sound is used to confirm your
lock on or off request. When in Lock mode,
the Lock icon will be displayed.
Nothing Comes Close to a Cobra
•
•
® 5