Removing & Installing Body Components
Battery
Rubber
strap
Battery
82
Positive
terminal
Negative terminal
#
Removal
Make sure the ignition switch is in the
position.
Remove the front seat.
1.
Remove the rubber strap.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to drop
5.
the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct after
the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
(Off)
P. 83
2
P. 33
2
P. 72
2
P. 110