Honda CRF50F 2017 Owner's Manual page 94

CLEANING
Clean your motorcycle regularly to protect
the surface finishes and inspect for damage,
wear and oil leakage.
Avoid cleaning products that are not
specifically designed for motorcycle or
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your motorcycle.
If your motorcycle is still warm from recent
operation, give the engine and exhaust
system time to cool off.
We recommend avoiding the use of high
pressure water spray (typical in coin-
operated car washes).
NOTICE
High pressure water (or air) can damage
certain parts of the motorcycle.
High pressure washer spray can damage
certain parts of your motorcycle. If you use
a high pressure washer, avoid spraying the
following areas:
Wheel Hubs
Muffler Outlet
Under Seat
Engine Stop Switch
Under Fuel Tank
Drive Chain
Carburetor
Ignition Switch
83