Yamaha F20A Owner's Manual page 216

e
w
ON
OFF START
EMU00961¯
Emergency Starting Engine
1) Remove the top cowling.
2) Remove the start-in-gear protection
cable 1 from the starter after remov-
ing the clip 2 and the screw 3 if the
q
cable is equipped.
3) Remove the starter/flywheel cover
after removing 4 bolts.
Disconnect the leads for the warning
indicator.
208061
208062
4) Prepare the engine for starting. See
"STARTING ENGINE" for procedures.
Be sure the engine is in Neutral and
that the lock-plate on the end of lan-
yard is attached to the engine stop
lanyard switch. Set the main switch to
"ON" if equipped.
506021***
5-7
GB