Vivotek AW-FCT-050A-250 Quick Installation Manual

INTRODUCTION
Model Power Source
AW-FCT-050A-250 1 0 0 ~ 2 4 0 VA C a n d
56V DC inuput
PACKAGE CONTENTS
* 1x EPoC RX switch
* 2x rack mount ears
IMPORTANT:
1. Install the EPoC RX switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and
dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5e or CAT6 UTP/STP cables and RG6 coaxial cables.
4. Please avoid using low quality cables, which will seriously limit the cabling distance and power delivery. 5. AC input
(100~240V/AC, 50~60Hz), for a max. consumption of 250W.
CONNECTION
4 AT/AF Cameras
AW-FCT-050A-250
8 AF Cameras
AW-FCT-050A-250
Distance/Power Chart
Length of coaxial cable AP-FEX-0105-T
100m -
300m 26.4W
500m 17.48W
800m 12.63W
1000m 8.84W
1200m 8.48W
1200~2400m Data only (100Mbps)
AW-FCT-050A-250 4 Ports Unmanaged EPoC Switch
Quick Installation Guide
Description
EPoC RX switch, 4x BNC, 1x GbE RJ45, 100~240V AC input, -0ºC~50ºC
* 1x Quick Installation Guide
* 1x power cord (type by the shipped-to area)
AP-FEX-0105-T
AP-FEX-0150-T
AP-FEX-0105-T
RG6 100m~1.2km
AP-FEX-0150-T
AP-FEX-0200-T
AP-FEX-0250-T
AP-FEX-0200-T
RG6 100m~1.2km
AP-FEX-0250-T
Coax
Ethernet
56v DC input
Grounding screw for 56v DC input
AP-FEX-0200-T
20W per port
12W per port
8W per port
Data only (100Mbps)
Data only (100Mbps)
Data only (100Mbps)
Data only (100Mbps)
AP-FEX-0150-T AP-FEX-0250-T
- 20W per port
25.2W 11.5W per port
17.64W 8W per port
11.76W Data only (100Mbps)
9.66W Data only (100Mbps)
7.56W Data only (100Mbps)
Data only (100Mbps) Data only (100Mbps)
Rev.: 1.1