Toro TimeCutter SS3225 Operator's Manual page 33

Figure 30
1. Foam element
6. Separate the foam and paper elements.
Servicing the Air-Cleaner Foam
Element
Service Interval: Before each use or daily—Clean
and check the air-cleaner foam
element.
1. Wash the foam element in liquid soap and
warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Important:
Replace the foam element if it
is torn or worn.
Servicing the Air-Cleaner Paper
Element
Service Interval: Every 50 hours—Replace the
air-cleaner paper element.
1. Clean the paper element by tapping it gently to
remove dust.
Note:
If it is very dirty, replace the paper
element (Figure 30).
2. Inspect the element for tears, an oily film, or
damage to the rubber seal.
3. Replace the paper element if it is damaged.
Important:
Do not clean the paper filter.
Installing the Foam and Paper
Elements
Important:
To prevent engine damage, always
operate the engine with the complete foam and
paper air cleaner assembly installed.
g233265
2. Paper element
1. Install the foam filter onto the paper filter
30).
2. Install the foam and paper filter onto the
air-cleaner housing.
3. Install the air-cleaner cover, and tighten the 2
knobs (Figure
33
29).
(Figure