Download
Share
Print this page
KUSSMAUL 023-4400-0 Instruction Manual
  1. Manuals
  2. Brands
  3. KUSSMAUL Manuals
  4. Monitor
  5. 023-4400-0
  6. Instruction manual

KUSSMAUL 023-4400-0 Instruction Manual

Engine monitor
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
INTRODUCTION
The VOTT meter is an ideal engine monitor, which displays data via the J1939 CAN Bus. The
meter utilizes a large LCD screen to simultaneously display DC volts, oil pressure, temperature
and tachometer. It provides accurate digital metering and user programmable alarms. When
alarm thresholds are exceeded, the built-in 85 dB alarm will sound and the affected display
reading will change to RED for the out-of-limit condition. Additionally, a new feature always for
user selectable baud-rate, 50k – 1000k bits/sec.
The meter is waterproof and rugged with a large color LCD display screen. The screen read-out
is divided into 4 display sections allowing the operator quick, and accurate assessment of engine
conditions.
DC volts are displayed from 9.5 – 33.0 VDC. Oil pressure is displayed from 0 – 99 PSI.
Additionally engine temp and RPM are displayed, 100 – 250 F and 0000 – 9999 RPM,
respectively.
The meter is powered by 12-24 VDC. Four levels of backlighting can be selected for optimal
performance. All set-up, calibration and alarm values are saved to non-volatile memory. The
system is complete with all necessary mounting hardware. The large LCD display draws only
0.08 amps at full brightness and only 0.02 in sleep mode. The meter comes with a 3 year
warranty.
170 Cherry Avenue
West Sayville, NY 11796
www.kussmaul.com
File: VOTT_023-4400-0
Rev: B
Revised By: PSS/JRN
Date: 01-17-2017
INSTRUCTION MANUAL
ENGINE MONITOR
VOTT
MODEL: 023-4400-0
3 YEAR WARRANTY
Ph: 800-346-0857
Fax: 631-567-5826
sales@kussmaul.com
1

Advertisement

loading

Related Manuals for KUSSMAUL 023-4400-0

Summary of Contents for KUSSMAUL 023-4400-0

  • Page 1 INSTRUCTION MANUAL ENGINE MONITOR VOTT MODEL: 023-4400-0 3 YEAR WARRANTY INTRODUCTION The VOTT meter is an ideal engine monitor, which displays data via the J1939 CAN Bus. The meter utilizes a large LCD screen to simultaneously display DC volts, oil pressure, temperature and tachometer.

  • Page 2: Menu Navigation

    2 seconds) will increment the Spacing Nut (x2) backlight level through four different intensities Lock Washer (x2) Mounting Bracket Bulkhead Gasket - Pre-Installed on Rear of Panel 170 Cherry Avenue Ph: 800-346-0857 West Sayville, NY 11796 Fax: 631-567-5826 www.kussmaul.com sales@kussmaul.com...
  • Page 3 Can Bus Bit Rates: 50,125,250,500,1000 K Bits. Engine Temp: High settable to 100 - 250 Units are factory set to 500K. Battery Volts: Low/High settable to 9.0 - 33.0 170 Cherry Avenue Ph: 800-346-0857 West Sayville, NY 11796 Fax: 631-567-5826 www.kussmaul.com sales@kussmaul.com...

  • Page 4: Specifications

    Oil Pressure: As provided by J1939 Alarms: Engine RPM, Low/High Oil Pressure, High Engine Temp. and Low/High Battery Volts Alarm Output: 12 VDC, 50 mA max. Kussmaul Electronics VOTT ENGINE MONITOR S/W= 20 H/W= XX www.kussmaul.com COPR. 2011,2016 Cruzpro LTD.

  • Page 5: Installation Record

    VEHICLE OWNER _______________________________________________________ WARRANTY POLICY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped.