CHAPTER
2
INSTALLATION
Unpacking
Before installing PW7K panel on site make sure the package is received in good
condition and seal is not tampered. If you find the package is tampered or not in
good condition, then contact customer service and return the device through the
RMA process. "Once seal is removed from the package, please make sure the panel
is stored in secure place till it is installed in the enclosure with tamper protection".
Installation
Recommendations include:
•
Securing Network Wiring
•
Securing The Enclosure
•
Ensuring The Latest Firmware
•
Normal Operations
Securing Network Wiring
Security Ethernet Network
PW7K uses Ethernet for below type of communications.
•
Web browser for the standalone user interface
•
Panel networking
•
Host/Pro-Watch access
It is recommended to use isolated/standalone network for installing PW7K panels.
Cabling must be concealed in secured area and must not be freely accessible.
PW7K Security Manual
@Honeywell Inc
1