Esc W Xl Xh Yl Yh Dxl Dxh Dyl Dyh - Citizen CBM-820 User Manual

ESC W xL xH yL yH dxL dxH dyL dyH

[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
Sets Print Area in Page Mode
ASCII ESC W
Hexadecimal 1B
Decimal 27
0 xL 255, xH = 0, 0
0 dyL 255, 0 dyH
This command sets the position and size of the print area in the page mode.
• The upper left start point is represented by (x0, y0), y-directional(vertical) length by dy dots,
and x-directional(horizontal) length by dx dots.
x0 = [(xL + xH × 256)]
dx = [(dxL + dxH × 256)]
(0, 0)
(x0, y0)
dy
• Setting beyond the printable area on the paper is automatically adjusted to the maximum
settable area, based on the effective values from xL to dyH (i.e., xL, xH, yL, yH, dxL, dxH,
dyL and dyH).
• The maximum x-directional dot in the printable area is 210.
• The maximum y-directional dot in the printable area is 480.
• When deploying the print data in the specified area, a print area length in the character
printing direction and vertical direction must be always 8 dots or more.
• Set the print area to the size fittable within the printing paper.
• If the start point (x0, y0) is beyond the printable area, this command will be ignored.
• Only setting is valid in the standard mode.
xL = xH = yL = yH = 0, dxL = 210,
dxH = 0, dyL = 224, dyH = 1
CAN, ESC L, ESC T
xL xH yL
57 xL xH yL
87 xL xH yL
yL 255, 0 yH
1 (Except dxL = dxH = 0 or dyL = dyH = 0)
y0 = [(yL + yH × 256)]
dy = [(dyL + dyH × 256)]
Printable Area on Paper
dx
Print area
(x0+dx-1, y0+dy-1)
– 60 –
yH dxL dxH dyL
yH dxL dxH dyL
yH dxL dxH dyL
1, 0 dxL 255, dxH = 0
(209 dots, 479 dots)
dyH
dyH
dyH