Download Print this page

AT&T CallVantage Centillium MTA-1 Quick Install Manual

Hide thumbs Also See for CallVantage Centillium MTA-1:

Advertisement

Quick Links

Quick Install Guide
for the Centillium
Telephone Adapter
Single PC connected directly to a DSL modem
– If you are using a home router, please see the other side of this sheet
– If you have a cable modem, please see other sheet
– If you have static IP (and for a description of static IP) please see instructions on
page 20 of the accompanying MTA-1
TM
Telephone Adapter Install Guide
Step 1: Gather Information
Make sure you have the following information before you start your Telephone Adapter (TA) installation:
AT&T CallVantage Service
AT&T CallVantage Service
User ID
Password
Your 10-digit AT&T CallVantage
®
You were provided or selected this
Service number (provided in your
when you ordered the service; if you
order confi rmation e-mail)
forgot it go to www.callvantage.att.com
and click "Forgot your password?"
Step 2: Shut Off All Equipment
IMPORTANT! Shut down and unplug each device separately (i.e.,don't simply shut off your powerstrip)
!
DSL JACK
DSL MODEM
DSL
POWER
OFF
Step 3: Connect Equipment
DSL JACK
DSL MODEM
DSL phone cord
(leave as-is)
Step 4: Turn on Equipment in Order
IMPORTANT! You must turn on your equipment
!
A
A
Plug in DSL modem, turn on,
and wait until all lights go steady
Step 5: Verify Your Connection
A
Open your browser and
Enter user in both the "User
A
B
type in http://192.168.15.1
name" and "Password"
fi elds, and click "OK"
Verify that the PWR, LAN,
If you still cannot browse
F
and WAN lights on the front
after restarting your PC or
of your TA are all steady
your PWR, LAN, and WAN
green (F) and you can
lights are not all steady
browse to a known website
green, see Troubleshooting
(e.g. www.att.com) (
). If
on page 25-26 of the
G
you cannot browse, restart
accompanying MTA-1
your PC.
Telephone Adapter Install
Guide.
Step 6: Activate Your TA
A
A
Go to www.callvantage.att.com
B
Click the "Activate TA"
and login using your AT&T
button.
CallVantage Service User ID
and password.
R08 MTAQIG 1005
®
TM
MTA-1
DSL Provider Username
(PPPoE Username)
You must get this from your DSL
provider
PERSONAL COMPUTER
ETHERNET
PORT
OFF
TELEPHONE
ethernet cable
(use existing cable)
B
B
Plug in TA and wait 30 seconds
C
B
On the Function Overview
C
screen, click PPPoE
F
TM
B
Follow the instructions on
C
the screen
CHECK YOUR PACKAGE CONTENTS
MTA-1
TM
Telephone Adapter
Power Adapter
TM
This will be referred to as the TA
Using a power supply with a different
in this guide.
voltage rating will damage and void the
warranty of this product.
Telephone Cord (Grey)
Ethernet Cable (Blue)
You can use this to connect
You can use this to connect your
your telephone to the TA
TA to your computer or router.
DSL Provider Password
(PPPoE Password)
You must get this from your DSL
provider
Shut down your PC and set the power switch to your DSL modem to "off"
A
Unplug your DSL modem
B
Leave all equipment off for at least 5 minutes
C
TELEPHONE ADAPTER (TA)
ethernet cable
(use cable provided)
for your service to work correctly
IN THE ORDER INDICATED
D
Select "Yes" under Enable
D
E
PPPoE, enter your DSL
provider username
(PPPoE username) and
DSL provider password
(PPPoE password), and
select "Keepalive" under
Settings. Click "Save
PPPoE Confi guration."
G
Setup complete
You can now make calls by dialing the 10-digit
number from the phone connected to your TA and use
the advanced features on www.callvantage.att.com
If you are transferring your current phone number to AT&T CallVantage
Service, you will not be able to receive calls or place 911 Emergency
Dialing calls until your number is transferred. See your order confi rmation
emails for additional details.
If you experience any problems with the service, please refer to
Troubleshooting, page 24 of the accompanying MTA-1
Adapter Install Guide.
!
WALL
PERSONAL COMPUTER
OUTLET
IMPORTANT use your existing cable between
!
your DSL modem and TA and the blue
cable that came in this package between your
TA and your PC
!
C
Turn on PC
C
E
Click "OK" to reboot
your TA. Once the reboot
is complete, you will be
returned to the Function
Overview screen.
TM
Telephone

Advertisement

loading

Summary of Contents for AT&T CallVantage Centillium MTA-1

  • Page 1 ® CHECK YOUR PACKAGE CONTENTS Quick Install Guide MTA-1 Telephone Adapter Power Adapter for the Centillium MTA-1 This will be referred to as the TA Using a power supply with a different in this guide. voltage rating will damage and void the warranty of this product.
  • Page 2 ® CHECK YOUR PACKAGE CONTENTS Quick Install Guide MTA-1 Telephone Adapter Power Adapter for the Centillium MTA-1 This will be referred to as the TA Using a power supply with a different in this guide. voltage rating will damage and void the warranty of this product.