Cisco Catalyst 3750 Series Datasheet page 4

IPv6 Capable—Getting Ready for the Future
The Catalyst 3750 supports IPv6 routing in hardware for maximum performance. As network devices grow and
the need for larger addressing and higher security become necessary, the Catalyst 3750 will be ready to meet the
requirement.
Standard Power over Ethernet Support—Graceful Addition of IP Communications
The Catalyst 3750 Power over Ethernet (PoE) models support Cisco IP phones and Cisco Aironet wireless
LAN access points, as well as any IEEE 802.3af compliant end device. The Catalyst 3750 24-port version can support
24 simultaneous full powered PoE ports at 15.4 Watts for maximum powered device support. The 48-port version
can deliver the necessary power to support 24 ports at 15.4 W, 48 ports at 7.7 W, or any combination in-between.
10Gigabit Ethernet Support—Increase Uplink Bandwidth For Gigabit Ethernet Deployments
The Catalyst 3750 allows network managers to incrementally add 10GbE connectivity in their wiring closets or
GRID clusters, further enabling and enhancing Gigabit Ethernet networks. This provides investment protection to
customers who wish to utilize their existing fiber plant, add uplink bandwidth capacity to their switching stacks, and
who want to provide higher performance to applications and users.
Management Options
The Cisco Catalyst 3750 Series offers both a superior command-line interface (CLI) for detailed configuration
and Cisco Cluster Management Suite (CMS) Software, a Web-based tool for quick configuration based on pre-set
templates. In addition, CiscoWorks supports the Cisco Catalyst 3750 Series for network-wide management.
Figure 4
Cisco Catalyst 3750 Series Switches
Cisco Systems, Inc.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 4 of 22