Page 1
ITEM# 498-1 MOP AND BROOM HOLDER INSTALLATION GUIDE...
Page 2
STEP 1 STEP 2 Take Out From Color Box Remove the Back sticker Firmly press sticker against clean wall for 30 seconds Wait 1 hour before moving to step three STEP 3 STEP 4 Insert The Holder Downward Installation finished...
Page 3
STEP 5 STEP 6 Pull the silicon out Push broom in to hold...
Page 4
Thank you for purchasing the Alpine Industries Mop and Broom Holder, 1 holder and 2 hooks! This holder can secure handled-tools such as brooms, mops, etc. The silicone holder allows them to be easily stored and removed quickly. NOTE Recommended for indoor and outdoor use - select an area of a wall that does not have electrical conduits or plumbing inside.