Electrolux EFC 60671 User Manual page 18

18 18 18 18 18 electrolux electr electr electr electr olux olux olux olux installation
First decide which functioning First decide which functioning
First decide which functioning First decide which functioning First decide which functioning
version is better for you version is better for you version is better for you
version is better for you version is better for you
GB
If you decide to use the hood in
extraction mode we suggest that you
position the upper section of the
chimney so that the oulet slots are not
visible once installation is completed,
on the contrary you decide to use the
hood in recirculation mode, BE SURE
that the side with the slots is upright
(see also A-B-C sequence).
Assembling the chimney flue
support/bracket (3 parts)
The three parts should be fixed with 4
screws, the support extension is
adjustable and should correspond to
the internal width of the telescopic
chimney flue.
Assembling the deflector (3 parts – Assembling the deflector (3 parts –
Assembling the deflector (3 parts – Assembling the deflector (3 parts – Assembling the deflector (3 parts –
only for filter version): only for filter version): only for filter version):
only for filter version): only for filter version):
The three parts should be fixed with 2
screws, the deflector extension is
adjustable and should correspond to
the width of the chimney flue support,
to which it is then fixed.
180°
A
C - OK!
4 x Ø 4x8
=
=
X
X
=
F
Ø 3,5 x 6,5
F
B
G
X
=
6 x
G