Samsung SM-F926B Service Manual page 15

5. Disassembly and Assembly
Step 3
Step 4
5-2-3. UWB Connector Remove
Step 1
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorisation is strictly prohibited.
Conn Cover
After removing the FPCB conn by placing the tweezers in the
UB Conn cover's separator groove (indicated by the arrow),
remove the SUB UB.
[Caution]
Be careful to not put your finger tips or foreign objects on the
SUB Camera lens ( ).
[Caution]
Be sure to remove any residual tape ( ) attached on the inside
of the SUB UB before reassembling the device.
Remove the COVER-PMO UWB connector.