Pause Mode - Beko KMD3102W User Manual

2 Use
WARNING: Move the speed ad-
justment button (9) to "0" position
when there is a power outage while
the appliance is operating or when
A
it is unplugged. When the power is
restored of the appliance is plugged
in, start from the 1st step again. The
appliance, which has stopped during
operation will not start again until
you move it to "0" position.
C
The processing time will be dis-
played in seconds on the LED display
(7) during operation.
3. When the process is done, switch the speed ad-
justment button (9) to "0" position again.
4. When the accessory has completely stopped,
unplug the appliance and lift the upper body
(see 3.5.1).

2.4.6 Pause mode

You can press Pause/Start button (10) at any mo-
ment during operation to pause/start the opera-
tion of the appliance.
12 / EN
The device will stop operating when you press
Pause/Start button (10). Time counting on the
LED display (7) will also stop.
The time counting will resume when you activate
the speed adjustment button (9) again.
When you move the speed adjust-
C
ment button (9) to "0" position, the
LED display (7) of the time counter
will automatically show 00:00.
Maximum counting time of the
counter is 09:59 (minute-second).
C
It will automatically be reset when
it exceeds this value. You need to
move the speed adjustment button
(9) to "0" position and operate it to
activate the counter again.
2.4.7 Counter
You can use the counter function especially for
your recipes that require a specific whisking/
blending/kneading duration.
1. Use the time adjustment buttons (8) at the
lower section of the LED display (7) to set the
desired processing time and operate the appli-
ance (see 3.5.5).
– When the set time elapses, the LED display (7)
light will go off and an audible warning will be
heard. The device will turn off automatically.
Kitchen Machine / User Manual