Table of Contents
Advertisement
3. Turn over the HX-Board Block.
4. Disconnect the connectors (HX1, HX2).
5. Remove 2 Hexagonal-Head screws and 1 screw of HX-
Board and then remove HX-Board.
9.6.
Removal of A-Board
1. Remove the HX-Board Block.
(Refer to Removal of HX-Board)
2. Disconnect the connectors (A5, A11, A13, A16, A22,
A37).
3. Remove the flexible cables from the connectors (A1,
A15).
4. Remove 4 screws and then remove A-Board.
Note: when fixing A-Board
• Put the flexible Cable between the Fixed Metal and A-
Board when Connect the flexible Cable to the connector
(A1).
9.7.
Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 7 screws and then remove the Fan Block (A, B,
C) and the Duct Barrier (A).
3. Remove each 1 screw ( ) and then remove the Fan from
the Fan Fixed Metal.
4. Remove each 4 Sponges (Fan Corner) from the Fan.
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponges around the Fan Block (A), (C).
23
TH-60PF30W
Advertisement
Table of Contents
