Quasar Q40FST2 Instruction Manual page 7

40" class 1080p led smart tv
Table of Contents

Advertisement

SLEEP
Set the TV to turn off after a given amount of time.
Toggles the Electronic Program Guide on or off under DTV source.
GUIDE
FAV
Brings up your favorite channel list.
CH LIST
Displays the channel list menu.
Colored buttons
(Red/Green/Yellow/Blue) Performs the corresponding function indicated at the bottom of the screen.
PICTURE
Selects picture mode.
Selects sound mode.
SOUND
CC
Brings up the closed caption menu.
MTS
Toggles through the MTS (multichannel television sound) settings.
Note: MTS is only available in TV mode and the options available may vary depending on
the channel's signal.
(Previous) Goes to the previous chapter.
(Stop) Stops viewing.
(Play/Pause) Starts, pauses or resumes viewing.
(Next) Goes to the next chapter.
Searches backward.
Searches forward.
Notes about using the remote control
- Aim the remote control towards the TV remote sensor window. The remote control will not function
properly if there are obstructions between the TV and the remote control.
- To ensure good performance, replace the batteries immediately if the remote control is not functioning
normally because the battery is running down.
- Never mix battery types or combine used batteries with new ones.
- When the batteries are low, battery acid may leak and damage the remote control. Once the batteries
are low, replace the batteries as soon as possible.
- If the remote control is not to be used for a long time, remove the batteries to avoid the leakage of battery acid.
- Keep the remote control in dark, dry places. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
Introduction

Advertisement

Table of Contents
loading

Related Products for Quasar Q40FST2

Table of Contents