Table of Contents
Advertisement
4. Push and hold the securing tab on the graphics-card slot and lift the graphics card from the PCIe x16 card slot.
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the graphics card and provides a visual representation of the installation procedure.
Steps
1. Align the graphics card with the PCIe x16 card slot on the system board.
2. Using the alignment post, connect the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Close the expansion-card door.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
After working inside your
computer.
40
Disassembly and reassembly
Advertisement
Table of Contents
