Dolomite® Gloss®
8 + 10 mm spanner (not included)
The brake handle must be in unlocked position to adjust
the braking effect.
1. Loosen the locking nut A.
2. To decrease the braking effect, turn the adjusting nut
B clockwise.
To increase the braking effect, turn the adjusting nut
B counter clockwise.
(The distance between the brake clamp and the wheel
should be 2 mm.)
3. Tighten the locking nut A properly to fix the new
adjustment.
14
DRAFT 001
A
B
1637696-B