Related Manuals for Sega 18 Wheeler
Summary of Contents for Sega 18 Wheeler
- Page 1 1st Printing: Feb 6, 2000 ADDENDUM TO OWNERS MANUAL SEGA ENTERPRISES, INC. USA MANUAL ADDENDUM: 999-0900...
-
Page 2: Warranty
Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman- ship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating condi- tions. - Page 3 OPTIONAL DOLLAR BILL ACCEPTOR THE COIN DOOR ASSEMBLY USED ON 18 WHEELER COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION. THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING...
- Page 4 REPLACE THIS PAGE (PAGE#56 in the ORIGINAL MAUAL) 10 - 2 VOLUME ADJUSTMENT/REPLACEMENT Volume adjustment/replacement should be performed after the HANDLE MECHA has been removed as per 10 -1. ADJUSTMENT In order to turn the HANDLE SHAFT, insert the STEERING HANDLE to the HANDLE SHAFT.
- Page 5 MODIFICATIONS TO THE DESIGN RELATED PARTS...
- Page 6 For all US modified parts you will notice that on the corresponding table it calls out LOCAL PURCHASE. This is to mean that these items cannot be purchased through SEGA’ S SERVICE DEPARTMENT and can be obtained at a local hardware store or a specialty store.
- Page 7 MODIFICATIONS TO PARTS ASSY #PTR-1000 (ASSY CHANGED TO PTR1-1000) PART NOT LISTED OR SHOWN IN DRAWING #999-0903 (3) Steering Spoke Cover Upper PART NOT LISTED OR SHOWN IN DRAWING #999-0904 (3) Steering Spoke Cover Lower Attached to Item #32 (Part No. PTR-2501 STEERING HANDLE) These parts are used for extra support/safety and are included in all US manufactured games.
- Page 8 EXPLODED VIEW OF US COIN DOOR ASSY...
- Page 9 MODIFICATIONS TO THE PARTS LIST (cont’d) REPLACED HARDWARE COMPONENTS (screws, nuts, etc..) ITEM DESCRIPTION QTY. NOTE: with regards to the items SEAT COVER -TOP REAR SCREW MS B0 M4X16 SC BT TMP (TOP) detailed at left. Those that are SCREW MS CHM M4X20 SC BT TMP (BOTTOM) underlined are the assemblies that CONTROL PANEL COVER the screws pertain to.
-
Page 10: Visit Our Website
VISIT OUR WEBSITE!